Product details
About this part
Upper radiator hose 95087747, also listed as 0381109-52 and CHVMR0054, for the Chevrolet Spark 1.2 from 2010 and the Spark Classic 1.2 from 2016, plus the Holden Barina Spark and the Chevrolet Beat which are the same car under other badges.
The hose is a moulded EPDM item, not a length of straight rubber: it is formed to the exact route between the thermostat housing and the top tank of the radiator, so it clears the air cleaner and the wiring loom without kinking. The centreline length is 355 mm and the inside diameter is 28 mm at both ends. Under the smooth outer cover there is a synthetic fibre knit reinforcement, which is what stops the hose collapsing when the system pulls a vacuum as it cools, and an EPDM tube that resists the coolant and the electrochemical degradation that kills older hoses from the inside. It carries no spring and no quick connect fitting; it is held by ordinary worm drive or constant tension clamps.
The fitment is worth spelling out because the Spark was sold under several names. In Europe and much of Asia the car is the Spark M300; in India and some neighbouring markets the same body is the Chevrolet Beat; in Australia it is the Holden Barina Spark MJ. The later M400 Spark and the US market Spark Classic use the same cooling layout on the 1.2, which is why one hose number covers all of them. Gates list this as their 24375, and the same hose appears under ACDelco 22843M, Continental 67076, Dayco 72985 and NAPA 17041, so a customer cross referencing any of those numbers will land on the right part.
How they fail. The first sign is usually a sweet smell of coolant after a run and a white or pink crust around the hose neck, followed by a slow drip onto the belt. A hose that has gone soft feels spongy when squeezed and will balloon under pressure; one that has gone hard will crack at the bend. Because this is the top hose, a burst here empties the system quickly and the temperature gauge climbs within a minute or two, so it is not a part to postpone.
Fitting notes. Drain the coolant with the engine cold, cut or unclip the old clamps rather than reusing them, and scrape the crust off both necks with a plastic scraper, not a screwdriver, so the aluminium is not gouged. Fit new clamps, push the hose fully home on both necks, and position the clamps just behind the bead. Fill slowly with the specified coolant, run the engine with the heater on full and the cap off until the thermostat opens and the level stops dropping, then fit the cap and check for leaks after a cooling cycle.
Supplied as one moulded hose only, clamps not included. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.