Home > All Products > Brakes > Brake System > Front Disc Brake Pad Set A690WK for Toyota Fortuner/Hilux/Prado/FJ Cruiser 2009-2020 2.7L-4.0L
Front Disc Brake Pad Set A690WK for Toyota Fortuner/Hilux/Prado/FJ Cruiser 2009-2020 2.7L-4.0L
Front Disc Brake Pad Set A690WK for Toyota Fortuner/Hilux/Prado/FJ Cruiser 2009-2020 2.7L-4.0L - image 1

Front Disc Brake Pad Set A690WK for Toyota Fortuner/Hilux/Prado/FJ Cruiser 2009-2020 2.7L-4.0L

≥ 100 pieces $3.07
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE A690WK · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE A690WK. Confirm your model and year before ordering.

Make
Model
Year
Engine
TOYOTA
Fortuner/Hilux/Prado/FJ Cruiser
2009.01-2020.12
2.7L-4.0L
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryBrake System
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
A690WK
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

A690WK is the reference this disc brake pad set is built to, and it is the number a workshop will look up for TOYOTA Fortuner/Hilux/Prado/FJ Cruiser.

This is the front axle set on most of the applications listed: two pads per caliper, and the axle needs two sets unless the listing says otherwise. The pad is a steel backing plate with a friction block bonded to it, and the friction block is shaped to the original rotor sweep so it beds in over the full face.

The fitment we have confirmed runs 2009.01 to 2020.12, and it is the single reference listed in the table, so check the chassis code before you order.

A shim or an anti squeal layer sits between the plate and the piston on the applications that use one, and it is fitted rather than left loose in the box. The backing plate is stamped to the original outline and thickness, because a plate that is too thin will flex and a plate that is too thick will not clear the caliper bracket.

A pedal that has grown long or a car that pulls to one side under braking points at a sticking caliper or a pad worn unevenly across the axle. A wear indicator light or a metal on metal scrape is the last warning; at that point the rotor is usually being damaged as well. A grinding that continues after the car stops moving is the backing plate touching the rotor, which means the friction material is gone.

Pump the pedal until it is firm before moving the car, then bed the pads in with a series of moderate stops rather than one hard one. Replace pads as an axle set and check the rotor thickness against the minimum marked on the hub before fitting new pads to a worn disc. Check the brake fluid level after the job, since pushing the pistons back raises it and an overfilled reservoir will spill onto paint. Replace the rotors at the same time if they are at or below minimum thickness, scored, or have a lip at the outer edge, since new pads on a worn disc will not bed properly.

Any doubt about A690WK fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.