Home > All Products > Brakes > Brake System > Front Disc Brake Pad Set A751K for Nissan Qashqai/X-Trail/Rogue and Suzuki Kizashi 2006-2016 1.5L-3.5L
Front Disc Brake Pad Set A751K for Nissan Qashqai/X-Trail/Rogue and Suzuki Kizashi 2006-2016 1.5L-3.5L
Front Disc Brake Pad Set A751K for Nissan Qashqai/X-Trail/Rogue and Suzuki Kizashi 2006-2016 1.5L-3.5L - image 1

Front Disc Brake Pad Set A751K for Nissan Qashqai/X-Trail/Rogue and Suzuki Kizashi 2006-2016 1.5L-3.5L

≥ 100 pieces $2.86
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE A751K · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE A751K. Confirm your model and year before ordering.

Make
Model
Year
Engine
NISSAN
Qashqai/X-Trail/Rogue
2006.01-2016.12
1.5L-3.5L
SUZUKI
Kizashi
2006.01-2016.12
1.5L-3.5L
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryBrake System
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
A751K
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

A751K disc brake pad set, supplied ready to fit the vehicles in the compatibility table below.

Pads work by converting motion into heat, so the compound has to hold its friction level from a cold first stop up to the temperatures a loaded car reaches on a long descent. On a sliding caliper the piston pushes the inner pad, the caliper body slides across and pulls the outer pad in, which is why both pads in a set wear at close to the same rate.

The fitment we have confirmed runs from 2006.01 to 2016.12, split across 2 references in the table, so check the chassis code against the list before you order.

The backing plate is stamped to the original outline and thickness, because a plate that is too thin will flex and a plate that is too thick will not clear the caliper bracket. The friction compound is a non asbestos formulation with a coefficient held inside a narrow batch band, so left and right brake with the same effort.

Pads that squeal only at low speed and light pedal are usually glazed; if the friction thickness is still in spec, bedding them in again may be enough. A wear indicator light or a metal on metal scrape is the last warning; at that point the rotor is usually being damaged as well. A grinding that continues after the car stops moving is the backing plate touching the rotor, which means the friction material is gone.

Open the bleeder screw slightly when pushing the piston back, so the displaced fluid does not travel back up into the ABS unit. Pump the pedal until it is firm before moving the car, then bed the pads in with a series of moderate stops rather than one hard one. Fit the shims and the wear indicator in the position the old ones came from, and check that the pad moves freely in the bracket before the wheel goes back on. Keep the first few hundred kilometres gentle, because a pad that is overheated before it beds in can leave a permanent transfer layer on the rotor.

Any doubt about A751K fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.