Home > All Products > Engine Cooling > Radiator Hose > Water Inlet Hose 16262-10011 for Toyota Corolla/Starlet (EE101/EP82) 1990-1996 1.3L/1.5L
Water Inlet Hose 16262-10011 for Toyota Corolla/Starlet (EE101/EP82) 1990-1996 1.3L/1.5L
Water Inlet Hose 16262-10011 for Toyota Corolla/Starlet (EE101/EP82) 1990-1996 1.3L/1.5L - image 1

Water Inlet Hose 16262-10011 for Toyota Corolla/Starlet (EE101/EP82) 1990-1996 1.3L/1.5L

≥ 300 pieces $1.43
Wholesale price Quotation within 24h · FOB / CIF
MOQ 300 pcs · OE 16262-10011 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 16262-10011. Confirm your model and year before ordering.

Make
Model
Year
Engine
TOYOTA
COROLLA (_E10_) 1.3 XLI 16V (EE101)
1992.07-1995.09
TOYOTA
COROLLA (_E11_) 1.4 (EE111_/ EE111R)
1997.05-1999.09
TOYOTA
COROLLA (_E9_) 1.3 i (EE90)
1987.05-1992.04
TOYOTA
COROLLA Compact (_E10_) 1.3 XLI 16V (EE101)
1992.07-1995.09
TOYOTA
COROLLA Estate (_E10_) 1.3 XLI 16V (EE101_/ EE101R)
1992.07-1995.09
TOYOTA
COROLLA FX Compact (E8B) 1.3 (EE80_/ EE80)
1985.09-1987.08
TOYOTA
COROLLA II Hatchback (_L5_) 1.3 (EL51)
1994.09-1999.07
TOYOTA
COROLLA Liftback (_E10_) 1.3 XLI (EE101_/ EE101R)
1992.07-1997.04
TOYOTA
COROLLA Liftback (_E9_) 1.3 i (EE90)
1987.07-1992.04
TOYOTA
CORSA Hatchback (_L5_) 1.3 (EL51)
1994.11-1999.09
TOYOTA
CORSA Saloon (_L5_) 1.3 (EL51)
1994.11-1999.09
TOYOTA
RAUM MPV (EXZ1_) 1.5 (EXZ10)
1997.05-2003.03
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryRadiator Hose
MOQ300 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
16262-1001105-19621626210011228045MH54791
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

The number 16262-10011 identifies this radiator hose, which fits TOYOTA COROLLA, COROLLA and COROLLA as set out in the fitment table.

The upper hose takes hot coolant from the thermostat housing to the radiator inlet, and the lower hose returns cooled coolant from the radiator outlet back to the pump. Because the hose is one of the few parts that sees both the hottest coolant and the full system pressure, a split or a soft wall shows up as a sudden loss of coolant rather than a gradual one.

The fitment we have confirmed runs from 1985.09 to 2003.03, split across 12 references in the table, so check the chassis code against the list before you order.

The ends are moulded to the stub diameter and often carry a locating mark, so the clamp sits behind the bead and cannot be pushed off under pressure. The cover is resistant to the oil and ozone that live under a bonnet, since most hose failures start as surface cracks rather than as a burst from inside.

Coolant loss with no puddle under the car can come from a hose that only weeps when hot, so check the ends and the clamp marks after a run. A hose that has been contaminated with oil will go soft and eventually split, so an oily hose should be replaced rather than cleaned. A pinhole leak usually shows as a fine spray or a white crust near a clamp, and it often only appears once the system is hot and pressurised.

Do not use sealant on a moulded hose joint; the seal is the rubber against the stub, and sealant makes the hose slip off under pressure. Use the correct type of clamp, and position it behind the bead rather than on it, then tighten until the hose cannot be rotated by hand. Clean the stub of old hose residue and corrosion, and check that the bead is intact so the new hose has something to clamp against. Keep coolant off the paint and wash it off promptly, as glycol attacks paint and the belt once it dries.

The reference 16262-10011 is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.