Browse 95 Hydraulic Gear Pump part numbers with OE cross-reference and fitment notes for passenger cars, SUVs, pickups and vans. Export packing available - send an inquiry for price and lead time.
These are the pumps that are not sold by vehicle OE number but by displacement, pressure and direction of rotation. They are fitted to Chinese heavy trucks, wide body mining dump trucks, construction equipment and agricultural machinery, where the steering system is specified by flow rather than by a car model.
The listing currently holds 95 pumps in this specification range. It covers 16 ml/r pumps for the Cummins 6BT, 31 ml/r units for wide body mining dump trucks, and 32, 50, 63 and 80 ml/r pumps for construction and agricultural vehicles in both CW and CCW builds. It also carries the named vane and gear pump series YBZ216N-100/130, YBZ218-220/150L, VOP202-A160/130G1, CACB16/12-20A and CB250-3406000.
Five values have to agree before a pump can be substituted. Displacement in ml/r sets the flow. Rated pressure in MPa sets the relief setting the pump was built for. Rotation CW or CCW is taken looking at the shaft end and is fixed by the engine accessory drive. The mounting flange and the shaft end have to match, whether keyed, splined or tapered, together with the shaft diameter. The port threads and their positions have to match as well, because a pump with the right displacement and the wrong port angle will not pipe up.
Pressure that falls away as the oil warms is internal leakage past the gear or vane tips rather than a relief valve fault. A pump that howls from the moment it starts is drawing air through a loose suction line or a clogged strainer. Oil at the shaft seal means the shaft bearing has already lost alignment, and a splined shaft that strips its teeth is usually a worn coupling rather than the pump itself.
Quote with displacement, pressure, rotation, flange and shaft type and port thread, or simply send a photograph of the nameplate on the old pump. Several displacements can be combined in one shipment, and the shaft end photograph is what removes most ordering errors on these units.
Only where the steering gear was offered with both. A higher displacement raises flow and makes the steering lighter and more sensitive, and the relief valve in the gear may no longer match the pump. Where the original displacement is not marked, measure the flow at the outlet before substituting.
By looking at the shaft end face on, and noting which way the shaft turns when the engine runs. The direction is set by the accessory drive and cannot be reversed, so a CCW pump on a CW drive will be damaged as soon as it primes.
The pump is rated for a maximum, but the system pressure is set by the relief valve in the steering gear. Fitting a higher rated pump does not raise system pressure, and fitting a lower rated one can burst the pump body when the relief lifts.
Where the part number is quoted with its flange type we can match the complete unit. Send the shaft end and flange photograph with the nameplate, and state the coupling type, so the pump arrives ready to bolt on.
Tell us the OE numbers, quantities and destination port. We confirm fitment against your references and quote with export packing options.