FOB Auto Parts Logo

Power Steering Cylinder

Browse 1 Power Steering Cylinder part numbers with OE cross-reference and fitment notes for passenger cars, SUVs, pickups and vans. Export packing available - send an inquiry for price and lead time.

Buying Power Steering Cylinder by OE number

A power steering cylinder is the hydraulic ram that provides the assistance on vehicles that use a separate cylinder rather than an integral rack or steering box. Fluid is directed to one side of the piston or the other by a control valve, and the rod end is attached to the steering linkage so that the ram pushes and pulls the linkage as the wheel is turned. The layout is common on older European cars, on light commercials and on some off-highway applications where the linkage is heavy enough that an integral rack is not practical.

This category carries one reference at present: 25278, the power assist cylinder listed for Peugeot 205 applications. It is the cylinder and rod assembly, with the ports for the pressure and return lines and the mounting eyes at each end.

Three things have to match. The bore and stroke, because a cylinder with the wrong stroke will either limit the steering lock or fail to reach full lock in one direction. The port size and position, because the pressure and return lines are handed and a cylinder with the ports on the wrong side will not clear the subframe. And the rod end fitting, which is either an eye for a pin or a threaded end for a ball joint, and the two are not interchangeable.

The failure pattern is a leak at the rod seal, a leak at the end cap, or a bent rod after an impact. A cylinder that leaks at the rod seal drips onto the linkage and loses assistance progressively, and because the fluid level drops the pump is usually the next part to fail. A bent rod shows as steering that is stiff in one direction and free in the other, and it cannot be straightened safely because the rod is hardened.

Order by the OE number together with the vehicle model and, where the cylinder has been rebuilt before, the bore and stroke actually measured on the old unit. A photograph of the old cylinder showing the ports and both ends is the fastest way to confirm a match.

Frequently asked questions

Can a leaking cylinder be resealed?

Where the bore is not scored and the rod is straight, a seal kit restores it. A scored bore or a pitted rod will destroy new seals within a short time, so the rod and bore have to be checked before deciding. On most applications a complete cylinder is the cheaper answer once labour is counted.

Why did my steering become stiff in one direction only?

A bent piston rod or a collapsed hose on one side. The rod is hardened and cannot be straightened, and a hose that has collapsed internally acts as a one-way restriction. Check the hose first because it is the cheaper part.

Is the cylinder interchangeable between models?

Rarely. Bore, stroke, port position and rod end differ even where the same family of vehicles is involved, and a cylinder that fits physically but has the wrong stroke will limit the steering lock. Match by OE number.

Do you confirm the reference before shipping?

Yes. Send the number from the old cylinder, the model and a photograph showing the ports and both ends. Where the unit has been rebuilt before, give the measured bore and stroke so the replacement matches what is actually fitted.

Send your OE list for a quotation

Tell us the OE numbers, quantities and destination port. We confirm fitment against your references and quote with export packing options.